Departement
Klinische Forschung
Achtung: Diese Seite kann nur von Administratoren besucht werden, da Sie nicht freigeschalten wurde.
Zurück
Publications Thieringer Florian Markus

3D-printable Open-source Cleft Lip and Palate Impression Trays - A Single-Impression-Workflow.

Meyer S; Benitez BK; Thieringer FM; Mueller AA. Plastic and reconstructive surgery. 2023.

Accuracy of dental implant placement using static versus dynamic computer-assisted implant surgery: An in vitro study.

Taheri Otaghsara SS; Joda T; Thieringer FM. Journal of dentistry. 2023.

Artificial intelligence in patient-specific hand surgery: a scoping review of literature

Keller M.; Guebeli A.; Thieringer F.; Honigmann P.. International Journal of Computer Assisted Radiology and Surgery. 2023.

Can Steam Sterilization Affect the Accuracy of Point-of-Care 3D Printed Polyetheretherketone (PEEK) Customized Cranial Implants? An Investigative Analysis.

Sharma N; Zubizarreta-Oteiza J; Tourbier C; Thieringer FM. Journal of Clinical Medicine. 2023.

Clinical and patient-reported outcome after patient-specific 3D printer-assisted cranioplasty.

Ebel F; Schön S; Sharma N; Guzman R; Mariani L; Thieringer FM; Soleman J. Neurosurgical Review. 2023.

Comparison of Artificial Intelligence-Based Applications for Mandible Segmentation: From Established Platforms to In-House-Developed Software

Ilesan R.R.; Beyer M.; Kunz C.; Thieringer F.M.. Bioengineering. 2023.

Dental and Maxillofacial Emergency Algorithms in Swiss Emergency Departments.

Sommacal A; Bingisser R; Filippi A; Bethke M; Thieringer FM; Jaquiéry C; Berg BI. Journal of Clinical Medicine. 2023.

Distance mapping in three-dimensional virtual surgical planning in hand, wrist and forearm surgery: a tool to avoid mistakes

Honigmann P.; Keller M.; Devaux-Voumard N.; Thieringer F.M.; Sutter D.. International Journal of Computer Assisted Radiology and Surgery. 2023.

Effect of Printing Parameters on Mechanical Performance of Material-Extrusion 3D-Printed PEEK Specimens at the Point-of-Care

Zarean P.; Malgaroli P.; Zarean P.; Seiler D.; de Wild M.; Thieringer F.M.; Sharma N.. Applied Sciences (Switzerland). 2023.

Fibroblast behavior on conventionally processed, milled, and printed occlusal device materials with different surface treatments.

Bieger V; Thieringer FM; Fischer J; Rohr N. Journal of Prosthetic Dentistry. 2023.

Finite element analysis of low-profile reconstruction plates for atrophic mandibles: a comparison of novel 3D grid and conventional plate designs.

Guerra RC; de Fátima Borim Pulino B; Salomão Júnior VF; Dos Santos Pereira R; Thieringer FM; Sacco R; Sader R; Vieira EH. Oral and Maxillofacial Surgery. 2023.

In-house 3D-printed custom splints for non-operative treatment of distal radial fractures: a randomized controlled trial.

Guebeli A; Thieringer F; Honigmann P; Keller M. The Journal of hand surgery, European volume. 2023.

Is the Pre-Shaping of an Orbital Implant on a Patient-Specific 3D-Printed Model Advantageous Compared to Conventional Free-Hand Shaping? A Systematic Review and Meta-Analysis.

Singh AK; Khanal N; Chaulagain R; Sharma N; Thieringer FM. Journal of Clinical Medicine. 2023.

Knowledge Domain and Innovation Trends Concerning Medical 3D Printing for Craniomaxillofacial Surgery Applications: A 30-Year Bibliometric and Visualized Analysis

Modgill V.; Balas B.; Chi M.; Honigmann P.; Thieringer F.M.; Sharma N.. Craniomaxillofacial Research and Innovation. 2023.

Medication-Related Osteonecrosis of the Jaw: A Cross-Sectional Survey among Urologists in Switzerland, Germany, and Austria.

Calderaro S; Bausch K; Tourbier C; Wetterauer C; Thieringer FM; Berg BI. Journal of Clinical Medicine. 2023.

Minimal invasives in-situ Bioprinting mittels schlauchbasiertem Materialtransport

Tomooka Y.; Spothelfer D.; Puiggali-Jou A.; Tourbier C.; Tankus E.B.; Thieringer F.M.; Cattin P.C.; Rauter G.; Eugster M.. At-Automatisierungstechnik. 2023.

Parameter optimization in a finite element mandibular fracture fixation model using the design of experiments approach

Maintz M.; Msallem B.; de Wild M.; Seiler D.; Herrmann S.; Feiler S.; Sharma N.; Dalcanale F.; Cattin P.; Thieringer F.M.. Journal of the Mechanical Behavior of Biomedical Materials. 2023.

Precision Surgery for Orbital Cavernous Hemangiomas: The Role of Three-Dimensional Printing in Individualized Resection-An Educational Experience.

Westarp E; Thieringer FM; Roethlisberger M. The Journal of craniofacial surgery. 2023.

Adhesive Property of 3D-Printed PEEK Abutments: Effects of Surface Treatment and Temporary Crown Material on Shear Bond Strength.

Wang D; Han X; Luo F; Thieringer FM; Xu Y; Ou G; Spintzyk S. Journal of Functional Biomaterials. 2022.

A Point-of-Care Digital Workflow for 3D Printed Passive Presurgical Orthopedic Plates in Cleft Care

Zarean P.; Zarean P.; Thieringer F.M.; Mueller A.A.; Kressmann S.; Erismann M.; Sharma N.; Benitez B.K.. Children. 2022.

Biomechanical Evaluation of Patient-Specific Polymethylmethacrylate Cranial Implants for Virtual Surgical Planning: An In-Vitro Study.

Msallem B; Maintz M; Halbeisen FS; Meyer S; Sigron GR; Sharma N; Cao S; Thieringer FM. Materials. 2022.

Biomimetic, mussel-inspired surface modification of 3D-printed biodegradable polylactic acid scaffolds with nano-hydroxyapatite for bone tissue engineering

Chi M.; Li N.; Cui J.; Karlin S.; Rohr N.; Sharma N.; Thieringer F.M.. Frontiers in Bioengineering and Biotechnology. 2022.

Clinical acceptance of advanced visualization methods: a comparison study of 3D-print, virtual reality glasses, and 3D-display.

Muff JL; Heye T; Thieringer FM; Brantner P. 3D printing in medicine. 2022.

Cold ablation robot-guided laser osteotomy in hand, wrist and forearm surgery-A feasibility study.

Honigmann P; Hofer M; Hirsch S; Morawska M; Müller-Gerbl M; Thieringer FM; Coppo E. The international journal of medical robotics + computer assisted surgery : MRCAS. 2022.

Editorial: Virtual surgical planning and 3d printing in head and neck tumor resection and reconstruction.

Su YX; Thieringer FM; Fernandes R; Parmar S. . 2022.

Fabrication and Characterization of PCL/HA Filament as a 3D Printing Material Using Thermal Extrusion Technology for Bone Tissue Engineering.

Wang F; Tankus EB; Santarella F; Rohr N; Sharma N; Märtin S; Michalscheck M; Maintz M; Cao S; Thieringer FM. Polymers. 2022.

Medical 3D printing with a focus on Point-of-Care in Cranio- and Maxillofacial Surgery. A systematic review of literature

Murtezani I.; Sharma N.; Thieringer F.M.. Annals of 3D Printed Medicine. 2022.

Nomogram predicting long-term overall and cancer-specific survival of patients with buccal mucosa cancer.

Wang F; Wen J; Cao S; Yang X; Yang Z; Li H; Meng H; Thieringer FM; Wei J. BMC Oral Health. 2022.

Planning of graft size and 3D reconstruction using virtual reality technique in aortic valve reimplantation.

Reid G; Gehweiler J; Thieringer F; Eckstein F; Ferrari E; Gahl B; Berdajs DA. Frontiers in Cardiovascular Medicine. 2022.

Point-of-Care Virtual Surgical Planning and 3D Printing in Oral and Cranio-Maxillofacial Surgery: A Narrative Review.

Ostaș D; Almășan O; Ileșan RR; Andrei V; Thieringer FM; Hedeșiu M; Rotar H. Journal of Clinical Medicine. 2022.

Positive regulation of osteogenesis on titanium surface by modification of nanosized Ca<sup>2+</sup>-exchanged EMT zeolites

Chi M.; Li N.; Sharma N.; Li W.; Chen C.; Dong B.; Cheng L.; Wang L.; Thieringer F.M.. Materials Today Communications. 2022.

Recurrent CTNNB1 mutations in craniofacial osteomas.

Baumhoer D; Berthold R; Isfort I; Heinst L; Ameline B; Grünewald I; Thieringer FM; Rudack C; Wardelmann E; Vieth V; Sperveslage J; Trautmann M; Hartmann W. Modern Pathology. 2022.

Tailoring the biologic responses of 3D printed PEEK medical implants by plasma functionalization.

Han X; Sharma N; Spintzyk S; Zhou Y; Xu Z; Thieringer FM; Rupp F. Dental Materials. 2022.

Topology-optimized patient-specific osteosynthesis plates

Maintz M.; Seiler D.; Thieringer F.M.; de Wild M.. Current Directions in Biomedical Engineering. 2022.

Vascular 3D Printing with a Novel Biological Tissue Mimicking Resin for Patient-Specific Procedure Simulations in Interventional Radiology: a Feasibility Study

Kaufmann R.; Zech C.J.; Takes M.; Brantner P.; Thieringer F.; Deutschmann M.; Hergan K.; Scharinger B.; Hecht S.; Rezar R.; Wernly B.; Meissnitzer M.. Journal of digital imaging. 2022.

3D-printed titanium implant combined with interleukin 4 regulates ordered macrophage polarization to promote bone regeneration and angiogenesis.

Zhao DW; Ren B; Wang HW; Zhang X; Yu MZ; Cheng L; Sang YH; Cao SS; Thieringer FM; Zhang D; Wan Y; Liu C. Bone & Joint Research. 2021.

3D-Printer-Assisted Patient-Specific Polymethyl Methacrylate Cranioplasty: A Case Series of 16 Consecutive Patients.

Schön SN; Skalicky N; Sharma N; Zumofen DW; Thieringer FM. World Neurosurgery. 2021.

A Multi-Criteria Assessment Strategy for 3D Printed Porous Polyetheretherketone (PEEK) Patient-Specific Implants for Orbital Wall Reconstruction.

Sharma N; Welker D; Aghlmandi S; Maintz M; Zeilhofer HF; Honigmann P; Seifert T; Thieringer FM. Journal of Clinical Medicine. 2021.

Case Report: Reconstruction of a Large Maxillary Defect With an Engineered, Vascularized, Prefabricated Bone Graft.

Ismail T; Haumer A; Lunger A; Osinga R; Kaempfen A; Saxer F; Wixmerten A; Miot S; Thieringer F; Beinemann J; Kunz C; Jaquiéry C; Weikert T; Kaul F; Scherberich A; Schaefer DJ; Martin I. Frontiers in Oncology. 2021.

Consumer vs. High-End 3D Printers for Guided Implant Surgery-An In Vitro Accuracy Assessment Study of Different 3D Printing Technologies.

Wegmüller L; Halbeisen F; Sharma N; Kühl S; Thieringer FM. Journal of Clinical Medicine. 2021.

Design and Additive Manufacturing of a Biomimetic Customized Cranial Implant Based on Voronoi Diagram.

Sharma N; Ostas D; Rotar H; Brantner P; Thieringer FM. Frontiers in Physiology. 2021.

Functional and Cosmetic Outcome after Reconstruction of Isolated, Unilateral Orbital Floor Fractures (Blow-Out Fractures) with and without the Support of 3D-Printed Orbital Anatomical Models.

Sigron GR; Barba M; Chammartin F; Msallem B; Berg BI; Thieringer FM. Journal of Clinical Medicine. 2021.

Heat transfer-based non-isothermal healing model for the interfacial bonding strength of fused filament fabricated polyetheretherketone

Basgul C.; Thieringer F.M.; Kurtz S.M.. Additive Manufacturing. 2021.

Heat transfer-based non-isothermal healing model for the interfacial bonding strength of fused filament fabricated polyetheretherketone

Basgul Cemile; Thieringer Florian M.; Kurtz Steven M.. . 2021.

High Precision Bone Cutting by Er: YAG Lasers Might Minimize the Invasiveness of Navigated Brain Biopsies.

Ha TT; Thieringer FM; Bammerlin M; Cordier D. Frontiers in Oncology. 2021.

In-Hospital 3D Printed Scaphoid Prosthesis Using Medical-Grade Polyetheretherketone (PEEK) Biomaterial.

Honigmann P; Sharma N; Schumacher R; Rueegg J; Haefeli M; Thieringer F. BioMed Research International. 2021.

In-hospital professional production of patient-specific 3D-printed devices for hand and wrist rehabilitation

Keller M.; Guebeli A.; Thieringer F.; Honigmann P.. Hand Surgery and Rehabilitation. 2021.

Navigated digital implantology Possibilities and limitations of innovative technologies Navigierte digitale Implantologie Möglichkeiten und Grenzen innovativer Technologien

Thieringer F.M.; Zarean P.; Zarean P.; Abazi S.; Joda T.. Implantologie. 2021.

Overview of In-Hospital 3D Printing and Practical Applications in Hand Surgery

Keller M.; Guebeli A.; Thieringer F.; Honigmann P.. BioMed Research International. 2021.

Quantitative Assessment of Point-of-Care 3D-Printed Patient-Specific Polyetheretherketone (PEEK) Cranial Implants.

Sharma N; Aghlmandi S; Dalcanale F; Seiler D; Zeilhofer HF; Honigmann P; Thieringer FM. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES. 2021.

Structure, properties, and bioactivity of 3D printed PAEKs for implant applications: A systematic review.

Basgul C; Spece H; Sharma N; Thieringer FM; Kurtz SM. Journal of Biomedical Materials Research - Part B Applied Biomaterials. 2021.

The need for overcorrection: evaluation of computer-assisted, virtually planned, fronto-orbital advancement using postoperative 3D photography.

Frank N; Beinemann J; Thieringer FM; Benitez BK; Kunz C; Guzman R; Soleman J. Neurosurgical Focus. 2021.

3D printed patient individualised models versus cadaveric models in an undergraduate oral and maxillofacial surgery curriculum: Comparison of students' perceptions.

Seifert LB; Schnurr B; Herrera-Vizcaino C; Begic A; Thieringer F; Schwarz F; Sader R. European Journal of Dental Education. 2020.

3D-printed patient individualised models vs cadaveric models in an undergraduate oral and maxillofacial surgery curriculum: Comparison of student's perceptions.

Seifert LB; Schnurr B; Herrera-Vizcaino C; Begic A; Thieringer F; Schwarz F; Sader R. European Journal of Dental Education. 2020.

Accuracy Assessment of Molded, Patient-Specific Polymethylmethacrylate Craniofacial Implants Compared to Their 3D Printed Originals.

Chamo D; Msallem B; Sharma N; Aghlmandi S; Kunz C; Thieringer FM. Journal of Clinical Medicine. 2020.

Additive manufacturing and 3D printing

Hirsch J.-M.; Palmquist A.; Rannar L.-E.; Thieringer F.M.. . 2020.

A massacre of early Neolithic farmers in the high Pyrenees at Els Trocs, Spain.

Alt KW; Tejedor Rodríguez C; Nicklisch N; Roth D; Szécsényi Nagy A; Knipper C; Lindauer S; Held P; de Lagrán ÍGM; Schulz G; Schuerch T; Thieringer F; Brantner P; Brandt G; Israel N; Arcusa Magallón H; Meyer C; Mende BG; Enzmann F; Dresely V; Ramsthaler F; Guillén JIR; Scheurer E; López Montalvo E; Garrido Pena R; Pichler SL; Guerra MAR. Scientific Reports. 2020.

A simple, effective, universal, and reusable osteotomy tool for jaw reconstructions with microvascular fibula transplants.

Meyer S; Hirsch JM; Leiggener CS; Zeilhofer HF; Thieringer FM. Journal of Plastic, Reconstructive and Aesthetic Surgery. 2020.

Can an entry-level 3D printer create high-quality anatomical models? Accuracy assessment of mandibular models printed by a desktop 3D printer and a professional device.

Hatz CR; Msallem B; Aghlmandi S; Brantner P; Thieringer FM. International Journal of Oral and Maxillofacial Surgery. 2020.

Comparative Evaluation of Digitization of Diagnostic Dental Cast (Plaster) Models Using Different Scanning Technologies.

Emara A; Sharma N; Halbeisen FS; Msallem B; Thieringer FM. Dentistry journal. 2020.

Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices.

Berli C; Thieringer FM; Sharma N; Müller JA; Dedem P; Fischer J; Rohr N. Journal of Prosthetic Dentistry. 2020.

Development and validation of a synthetic 3D-printed simulator for training in neuroendoscopic ventricular lesion removal

Licci M.; Thieringer F.M.; Guzman R.; Soleman J.. Neurosurgical Focus. 2020.

Dimensional characteristics of FDM 3D printed PEEK implant for craniofacial reconstructions

Neha Sharma; Philipp Honigmann; Shuaishuai Cao; Florian Markus Thieringer. . 2020.

Effects of Steam Sterilization on 3D Printed Biocompatible Resin Materials for Surgical Guides-An Accuracy Assessment Study.

Sharma N; Cao S; Msallem B; Kunz C; Brantner P; Honigmann P; Thieringer FM. Journal of Clinical Medicine. 2020.

Evaluation of the Dimensional Accuracy of 3D-Printed Anatomical Mandibular Models Using FFF, SLA, SLS, MJ, and BJ Printing Technology.

Msallem B; Sharma N; Cao S; Halbeisen FS; Zeilhofer HF; Thieringer FM. Journal of Clinical Medicine. 2020.

Fibula Graft Cutting Devices: Are 3D-Printed Cutting Guides More Precise than a Universal, Reusable Osteotomy Jig?

Meyer S; Hirsch JM; Leiggener CS; Msallem B; Sigron GR; Kunz C; Thieringer FM. Journal of Clinical Medicine. 2020.

In Vitro Mechanical and Biological Properties of 3D Printed Polymer Composite and β-Tricalcium Phosphate Scaffold on Human Dental Pulp Stem Cells.

Cao S; Han J; Sharma N; Msallem B; Jeong W; Son J; Kunz C; Kang HW; Thieringer FM. Materials. 2020.

Melanotic neuroectodermal tumor of infancy to the skull: case-based review.

Ebel F; Thieringer FM; Kunz C; Klein-Franke A; Scheinemann K; Guzman R; Soleman J. Child's Nervous System. 2020.

Quality Characteristics and Clinical Relevance of In-House 3D-Printed Customized Polyetheretherketone (PEEK) Implants for Craniofacial Reconstruction.

Sharma N; Aghlmandi S; Cao S; Kunz C; Honigmann P; Thieringer FM. Journal of Clinical Medicine. 2020.

Three-Dimensional Analysis of Isolated Orbital Floor Fractures Pre- and Post-Reconstruction with Standard Titanium Meshes and "Hybrid" Patient-Specific Implants.

Sigron GR; Rüedi N; Chammartin F; Meyer S; Msallem B; Kunz C; Thieringer FM. Journal of Clinical Medicine. 2020.

{A simple, effective, universal, and reusable osteotomy tool for jaw reconstructions with microvascular fibula-transplants}

Simon Meyer DMD, BMed; Jan-Michaél Hirsch DDS, PhD; Christoph S Leiggener MD, DDS; Hans-Florian Zeilhofer MD, DDS; Florian M Thieringer MD, DDS MHBA. British journal of plastic surgery. 2019.

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants.

Han X; Sharma N; Xu Z; Scheideler L; Geis-Gerstorfer J; Rupp F; Thieringer FM; Spintzyk S. Journal of Clinical Medicine. 2019.

Retrobulbar haematoma in the era of anticoagulants.

Berg BI; Flury E; Thieringer FM; Augello M; Savic M; Schötzau A; Kunz C; Goldblum D. Injury. 2019.

Strawberry gingivitis: Challenges in the diagnosis of granulomatosis with polyangiitis on gingival specimens.

Msallem B; Bassetti S; Matter MS; Thieringer FM. Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology. 2019.

The Comprehensive AO CMF Classification System for Mandibular Fractures: A Multicenter Validation Study.

Mittermiller PA; Bidwell SS; Thieringer FM; Cornelius CP; Trickey AW; Kontio R; Girod S; and the AO Trauma Classification Study Group. Craniomaxillofacial trauma & reconstruction. 2019.

Three-dimensional Assessment of the Breast: Validation of a Novel, Simple and Inexpensive Scanning Process.

Oranges CM; Madduri S; Brantner P; Msallem B; Giordano S; Benitez B; Kalbermatten DF; Schaefer DJ; Thieringer FM. In Vivo. 2019.

3D Printed Surgical Simulation Models as educational tool by maxillofacial surgeons.

Werz SM; Zeichner SJ; Berg BI; Zeilhofer HF; Thieringer F. European Journal of Dental Education. 2018.

A nationwide survey of undergraduate training in oral and maxillofacial surgery.

Seifert LB; Hoefer SH; Flammiger S; Rüsseler M; Thieringer F; Ehrenfeld M; Sader R. Oral and Maxillofacial Surgery. 2018.

A three-dimensional printed patient-specific scaphoid replacement: a cadaveric study.

Honigmann P; Schumacher R; Marek R; Büttner F; Thieringer F; Haefeli M. The Journal of hand surgery, European volume. 2018.

Evaluation of Two 3D Printers for Guided Implant Surgery.

Sommacal B; Savic M; Filippi A; Kühl S; Thieringer FM. The International journal of oral & maxillofacial implants. 2018.

Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application.

Honigmann P; Sharma N; Okolo B; Popp U; Msallem B; Thieringer FM. BioMed Research International. 2018.

The Evolution of Photography and Three-Dimensional Imaging in Plastic Surgery.

Oranges CM; Thieringer FM; Kalbermatten DF; Haug M; Schaefer DJ. Plastic and reconstructive surgery. 2018.

Craniofacial Reconstruction by a Cost-Efficient Template-Based Process Using 3D Printing.

Msallem B; Beiglboeck F; Honigmann P; Jaquiéry C; Thieringer F. Plastic and Reconstructive Surgery - Global Open. 2017.

Mandibular fractures according to the AO-CMF trauma classification

Cornelius, C. -P.; Neff, A.; Thieringer, F.; Kunz, C.; Smolka, W.; Reichert, T.; Audige, L.; Prein, J.. MKG-CHIRURG. 2017.

Midface fractures according to the AO-CMF trauma classification

Kunz, C.; Thieringer, F.; Smolka, W.; Wilde, F.; Metzger, M.; Reichert, T.; Buitrago-Tellez, C.; Audige, L.; Prein, J.; Cornelius, C. -P.. MKG-CHIRURG. 2017.

Orbital fractures according to the AO-CMF level 3 trauma classification

Kunz, C.; Cornelius, C. -P.; Audige, L.; Thieringer, F.; Buitrago-Tellez, C.; Metzger, M.; Wilde, F.; Prein, J.. MKG-CHIRURG. 2017.

Rapid processing 3D printing for preoperative planing and precontouring of implants for acute acetabular fractures - a case series

Bilici, M.; Thieringer, F.; Brantner, Ph.; Jakob, M.; Eckardt, H.. British Journal of Surgery. 2017.

The first comprehensive Craniomaxillofacial Classification System

Thieringer, Florian M.; Prein, Joachim. MKG-CHIRURG. 2017.

A Simple 3-Dimensional Printed Aid for a Corrective Palmar Opening Wedge Osteotomy of the Distal Radius.

Honigmann P; Thieringer F; Steiger R; Haefeli M; Schumacher R; Henning J. Journal of Hand Surgery. 2016.

Custom implants for humans from a 3-D printer

Thieringer F.; Popp U.; Okolo B.; Schumacher R.; Honigmann P.. Kunststoffe International. 2016.

Temporomandibular joint eminectomy according to Myrhaug. An effective operative treatment option in patients with recurrent dislocation

Cremer, R. S.; Leiggener, C. S.; Jaquiery, C.; Thieringer, F.. MKG-CHIRURG. 2016.

Computer-assisted virtual planning and surgical template fabrication for frontoorbital advancement

Soleman J.; Thieringer F.; Beinemann J.; Kunz C.; Guzman R.. Neurosurgical Focus. 2015.

Implant Supported Fixed Dental Prostheses Using a New Monotype Zirconia Implant-A Case Report.

Roehling S; Ghazal G; Borer T; Thieringer F; Gahlert M. Dentistry journal. 2015.

One-step immediate reconstruction of the midface with patient specific PEEK implants: Challenges and chances

Thieringer, F. M.; Maurer, J.; Beinemann, J.; Zeilhofer, H. -F; Jaquiery, C.; Kunz, C.. Oncology Research and Treatment. 2015.